Electric Brakes on average can draw arounf 3 amps each. So if you have
brakes on one axle you will draw around 6 amps. My Trail King lowboy draws
around 12 amps total for dual axles and uses a 20 amp fuse......
Jon
At 07:17 PM 8/30/00 -0400, you wrote:
>
>I have an idea of what the current draw is for the various 12 and 24 volt
>lamps used in our MVs, civis and trailers.
>
>I have never measured it.
>What is the range of current needed for a trailer's electric brake, one
wheel?
>I guess it has to be a function of brake design, wheel diameter, applied
>braking force,etc.
>
>Ted H.
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@skylee.com>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@skylee.com>
>To reach a human, contact <help@skylee.com>
>
This archive was generated by hypermail 2b29 : Sat Sep 02 2000 - 09:32:38 PDT