Hi
You can use your Model 18 on your T90. Go to http://www.off-road.com/jeep/tech/xfer/d18.html to see the differences in the transfer cases. Make sure that you use the t-case input gear that came with your t-case.
Dave Fillman
45 MB
---- you wrote:
> Hi All
> I am curious if a T-90A1 transmission will mate with a Spicer 18
> transfer case. The Spicer 18 is a GPW case so it has the 3/4 inch
> intermediate shaft, and I believe it has a reduction ratio of 1.97:1 vs.
> 2.46:1 (the Spicer 18 in my M38A1). However, I had always assumed the
> T-90 family will bolt right in with any Spicer 18, as the meshing gears
> between them is the same, it's the gears from that point to the output
> shafts that are different. Is this a wrong assumption? I have heard
> from some that you can't do it without changing the gears in the
> transfer case. By the way, I am not messing around with the A1's
> drivetrain, I am off on another project. Could someone please let me
> know.
> Thanks
> Sean
> MVPA 14222
> 53 M38A1
> 67 M416
> 51 M135
----------------------------------------------------------------
Get your free email from AltaVista at http://altavista.iname.com
This archive was generated by hypermail 2b29 : Tue Oct 24 2000 - 20:55:35 PDT