M-35 brake tool

From: Joe Shannon (fordpart@bellsouth.net)
Date: Sun Dec 31 2000 - 08:32:52 PST


All I did was take a cheep end wrench, heat it with my smoke
wrench(torch) and put a 90 degree bend in it right behind the head then
cut the boxed end off and welded on a tee handle. This made it stick up
above the floor board. There is now permenently in the toolbox of each
truck.



This archive was generated by hypermail 2b29 : Tue Jan 02 2001 - 23:13:26 PST