No, David, they are quite helpful, thank you. your LDT assumption is
correct.
If I had the actual hp/rpm and torque/rpm curves, or assuming they are
symmetrical curves, they probably intersect at about 2,000 rpm. That is
where I am told max efficiency occurs.
Any one have any thoughts?
Henry
----- Original Message -----
From: <DDoyle9570@aol.com>
To: <ygmir@onemain.com>; <mil-veh@uller.skylee.com>
Sent: Wednesday, September 19, 2001 8:47 PM
Subject: Re: [MV] top speed of an M35
> I suspect these are too far apart for what you want....
> the information here is from govt TM. I will assume your truck powered
by
> LDT...
>
> Horsepower max is 130@2600rpm
> torque peak 305 ft/lbs @1500 rpm
>
> Hope this helps,
> DD
>
This archive was generated by hypermail 2b29 : Mon Oct 08 2001 - 10:59:00 PDT