Re: [MV] CUCV Voltmeter

From: Chris Stansbury (chris_stansbury@hotmail.com)
Date: Thu Jan 17 2002 - 22:10:49 PST


Hey Joe,
Check the orange wire coming off of the passenger side alt. My guage quit
working once too. The wire had broken off inside the terminal. If not
there, trace it back through the harness and see if it's broken somewhere or
pinched and grounding out. Good luck.
Sincerely,
Chris Stansbury
Memphis, TN
webmaster, http://www.steelsoldiers.com
1984 M1009 CUCV
1961 M116/BCTM pioneer tool trailer
1970 M35A2 w/w

Message-ID: <3C46077A.50608@accucomm.net>
Date: Wed, 16 Jan 2002 18:06:34 -0500
From: Joe Boone <jboone@accucomm.net>
Subject: [MV] CUCV Voltmeter

To the list: The voltmeter in my M1009 quit working, but doesn't appear
to be the gauge.
My test meter shows no voltage at the terminals where the gauge plugs
in. Output on both alternators is within specs. Wiring appears OK. Is
there a fusible link for the voltmeter? Other causes?
Any help greatly appreciated.
Joe
1986 M1009
1984 M1008
1985 M1008 (for sale)

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com



This archive was generated by hypermail 2b29 : Wed Feb 06 2002 - 11:49:30 PST