Re: [MV] M35A2 turn signal

From: mydogexcitesme@times
Date: Wed Apr 24 2002 - 09:06:31 PDT


sorry, but the switch does not have to be grounded. there are no wires
from the switch that go to ground and no part of the switch that is
grounded. the most common problem is the three pin connector at the
flasher. you may have to clean and introduce a slight bend in the pins
to ensure a good connection.
tom



This archive was generated by hypermail 2.1.4 : Tue May 21 2002 - 23:25:41 PDT