o-Rings

From: Ryan M Gill (rmgill@mindspring.com)
Date: Thu May 15 2003 - 11:31:52 PDT


I'm looking for a set of o-rings for my Daimler Dingo. I've been
re-building the tracta joint housing on the front right wheel
station. I thought I had a source for the o-rings today but it turns
out they want a minimum of 25 of each type. At a $1.5 to nearly $2
each, that's a hefty chunk of change for some o-rings when I just
need 1 of each type (4 sizes total).

110mm x 2.5 mm or 4.3307" x 0.09842"
108mm x 3 mm or 4.25197" x 0.11811"
116mm x 3 mm or 4.56693" x 0.11811"
115mm x 2.5 mm or 4.52756" x 0.09842"

Anyone know of a shop that has larger size o-rings with small cross
section in their area? I don't need 25 of each of these o-rings. At
most I need 2.

-- 
--
----------------------------------------------------------------
- Ryan Montieth Gill                         '01 Honda Insight -
- rmgill@SPAmindspring.com                          '85 CB700S -
- ryan.gill@SPAMturner.com               '76 Chevy Monte Carlo -
- www.mindspring.com/~rmgill                   '72 Honda CB750 -
-                                     '60 Daimler FV701H Mk2/3 -
-                                  '42 Daimler Scout Car Mk II -
-             I speak not for CNN, nor they for me             -
----------------------------------------------------------------
-        The director of Home Security encourages you to       -
-          turn in your neighbor & spy on your friends.        -
----------------------------------------------------------------
-  C&R-FFL  /  Protect your electronic rights!    \ EFF-ACLU   -
- SAF & NRA/  Join the EFF!  http://www.eff.org/   \ DoD #0780 -
----------------------------------------------------------------


This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:20:30 PDT