From: Keith (ktuzzo@earthlink.net)
Date: Thu Sep 30 2004 - 06:21:48 PDT
Give your local Caterpillar dealer a try . They have a hose shop and will
make any hose for you just bring the old hose.
----- Original Message -----
From: "James Shanks" <n1vbn@arrl.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Thursday, September 30, 2004 5:29 AM
Subject: Re: [MV] M1009 CUCV Oil cooler hose
>
> I am about to do the same to mine. If it is still driveable go to your
> nearest hydraulic hose maker, don't know of any? Stop into any large
> construction/paving company and ask the head mechanic. He should be able
> to direct you to a hydraulic hose maker. hydraulic hoses are generally
> made to order so if you vehicle is driveable he will measure the hose's
> and be able to identify the fittings needed and make em up while you wait.
> Only takes 15 20 minutes if he isn't busy.
>
> Jim
>
>
>
>
> At 06:44 PM 9/29/2004, M2116X6@aol.com wrote:
>>I'm looking for the lower oil cooler hose on the M1009. Part #15548902.
>>Does anyone know of any available before I have one made locally? GM
>>dealer didn't show it. I called Gates main office and found they offer
>>everything for the CUCV's except oil cooler hoses.
>>
>>Any help appreciated.
>>Jim Maier
>>
>>===Mil-Veh is a member-supported mailing list===
>>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>>To reach a human, contact <ack@mil-veh.org>
>
> James Shanks
> n1vbn@arrl.net
> 1985 M1009
> 1998 IMZ 8.103
> 1984 H-D FLHT-C
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:35:16 PDT