Re: [MV] Fire Extinguisher for M1008

From: Chris Brunner (cjbrunner@optonline.net)
Date: Sat Jan 01 2005 - 21:46:20 PST


an ABC type extinguisher will destroy anything electrical. A BC type
extinguisher will not (although it's a pain to clean the dust out of the
connections, it doesn't bond to the metal and permanently destroy any
possibilities of conducting juice again). Although it's a little more
difficult to get just a BC, it will save what's left of the truck for a
rebuild after a fire.

Brian Placzankis wrote:

> Great!
>
> Thanks Doug, I'll be heading to Lowe's first chance I get.
>
> BTW, I took advantage of the wonderful 66 F warm weather in Maryland
> today and got my Blackout light (the one in the grill just above the
> bridge plate) working today. I don't know the proper name for this
> housing, I think that someone once told me it was for maps. If anyone
> on the list knows the proper term, I would be keen on learning it. As
> for the condition of this light, it turns out it wasn't the bulb or
> the wires. It was complete corrosion of the interior bracket and
> socket. This Aurora company - could they have made it any cheaper
> from a materials selection point of view? After much scraping &
> sanding I finally revealed enough bare metal to make functional
> electrical contacts but still overall the inside of this unit is a
> complete disaster. So in the last 2 days I have restored 2 bulbs that
> never worked since I purchased the truck to working condition. The
> other bulb (for those keeping track) was the interior under dash
> light. I must say it will be much easier to find that series 5200
> lock on the wheel chain in pitch darkness from now on.
>
> If I can score that nice straight bed, all that will be left for me to
> do is line up a good body shop to remove a few minor (but darned hard
> to get to) cab dents courtesy of Mr. Forklift and fill in some tiny
> rust pinholes near the lower cab corners (I'm thinking Metco
> Spraysteel LS wire spray there). Then the complete repaint with
> MIL-DTL-64159 - Waterborne CARC.
>
> plaz
> 1985 M1008
>
>
> On Jan 1, 2005, at 2:20 PM, R392 wrote:
>
>> The one I bought had a black plastic bracket and it matched perfect.
>> Buy one with a gauge. Ill send a pic. if you need.
>> It is the same thing I had in the kitchen.
>> They never used anything extravagant.
>> Doug
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:39:25 PDT