RE: [MV] 12v M38A1

From: Gray, Chris (Chris.Gray@fmr.com)
Date: Tue Mar 01 2005 - 12:31:52 PST


Thanks Ron

Haven't done it yet, just looking at options. Your point was taken..

-----Original Message-----
From: Ron [mailto:rojoha@adelphia.net]
Sent: Tuesday, March 01, 2005 2:40 PM
To: Military Vehicles Mailing List; Gray, Chris
Subject: Re: [MV] 12v M38A1

Chris,
   Lets play devils advocate here...
 You bought it and since it's yours, you have the right to do anything
you
want to it. Morally though.....

If you want to REBUILD an M38A1 from the ground up, but want to change
it
into something it never was, why not restore a CJ5 instead and paint it
OD
and sell the M38A1 to some one who wants to restore an HMV?
    You want to change to 12VDC for what purpose? Reliability? Cheaper
parts? Because the right parts for the 24VDC restoration are too
expensive
or too hard to find?
    If you want to convert to 12VDC, you don't want an M38A1 wiring
diagram,
but a CJ5 diagram. Try your local PEP Boys, Auto Zone or auto supply or
CJ
Whitney for books on civilian jeeps.
        While you are at it, might as well pull the 4 banger and put in
a V6
for more power, and super swampers for better traction and flotation.
Diamond plate steel all the outside sheet metal to make the outside
stronger, and put in M35 axles for more ground clearance. Add Recaro
racing
seats for more comfort? Lift kits? Air horns? 8 Track?
    Then make sure you tell every one it's a restored and 'improved',
for
reliability purposes you understand, real, honest ta gawd army
jeep......

----- Original Message -----
From: "Gray, Chris" <Chris.Gray@fmr.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: 01 March, 2005 10:44
Subject: [MV] 12v M38A1

HI Everyone - I'm rebuilding an M38A1 from the ground up. I'm thinking
of converting it over to 12v. Any thoughts on this? Is there anyone
out there that has done it before and could give me some tips, good and
bad.

Does anyone have a wiring diagram for the m38a1

Thanks
Chris



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:41:21 PDT