From: Glenn Shaw (wolf.star@verizon.net)
Date: Fri Apr 29 2005 - 07:40:27 PDT
Hi
If you just make the wiring of the lights the same as the humvee or the
M151A2 you are able to run parking lights by themselves or with the
headlights, all right from your existing 3 lever or digital master light
switch. Or you can add a switch as below.
-----Original Message-----
From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org] On Behalf
Of Fred H. Schlesinger
Sent: Friday, April 29, 2005 10:29 AM
To: Military Vehicles Mailing List
Subject: Re: [MV] question about front lights on m35a2
Install a switch between the two and you can turn off your headlamps in the
park position if you just want to leave the parking lights on, like, for
example, for parking.
-----Original Message-----
From: John Stewart-Smith [mailto:micdunn@ev1.net]
Sent: Friday, April 29, 2005 9:49 AM
To: Military Vehicles Mailing List
Subject: Re: [MV] question about front lights on m35a2
Mark, go to the back of TM 9-2320-361-20.
There are a bunch of foldout pages.
Foldout #1 is the entire M35A2 schematic.
If I was going to make this modification, I would attach wire #16, which is
input 24V to the left foot dimmer switch, (from headlamp switch pin M) and
attach it to wire # 491, which goes to both front park lights and comes from
pin B of the headlamp switch. I think its pin B, the schematic is
indistinct. The little metal tags on each end of the wires are marked so:
Left foot dimmer switch: 16 Front park lamp: 491 Headlamp switch, both
headlamps power: 16 Headlamp switch, park lamp power: 21 Realize if you
connect the two, your headlamps will come on in the Park position. Enjoy.
-Sarge
----- Original Message -----
From: "Mark B. Anderson" <mark@aasurplus.ca>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Friday, April 29, 2005 7:43 AM
Subject: [MV] question about front lights on m35a2
> Hi all,
>
> ok question for everyone. Which TM do I need to look at to figure out
> the front lighting of the M35A2. what I need to do is make the front
> park lights come on with the
headlights.
> Is this possible which wire do I splice in? the TM would be the best I
think
> and I have them all but cannot find the pages I need to do this?
>
> any help here is great thanks for your time.
>
===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org> To
reach a human, contact <ack@mil-veh.org>
===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org> To
reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:42:57 PDT