RE: [MV] M1008 starter problems

From: joeyounginc@aol.com
Date: Wed Jun 01 2005 - 06:29:39 PDT


Thanks for all of the help, I sure appreciate it and it
saved me a lot of work. I checked the relay terminals
for 24 volts and with key in start position on for 12 v.
Jumped the two side wire terminals and the starter
spun over. I took the realy apart and found a broken
wire on the coil.
Thanks for the schematic, too, my CUCV CD won't
open all of the manuals.
Joe



This archive was generated by hypermail 2.1.4 : Fri Oct 28 2005 - 22:47:26 PDT