Re: [MV] CUCV M105A1 trailer wiring M1009

From: Wayne Harris (papercu@hotmail.com)
Date: Tue Jul 26 2005 - 15:18:43 PDT


Well Stu you might want to check that -10 again, the Blazer can tow a bit
more "Gross load will not exceed 10,000 pounds for M1009". You just don't go
very fast. Wayne

>From: "Stu" <stuinnh@mvnut.us>
>To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
>Subject: Re: [MV] CUCV M105A1 trailer wiring M1009
>Date: Tue, 26 Jul 2005 17:37:09 -0400
>
>The 105A1 trailer is too heavy for a CUCV Blazer. They are only rated to
>tow M416 1/4 ton trailers. You might be able to tow a 101A1 3/4 ton but
>put
>a trans cooler in the truck. These TH400 transmissions burn up easily. I
>tow a popup camper, about 2000 lbs with surge brakes. Hills on the hwy are
>a problem for me. The 105A1's are towed by a deuce usually.
>The reason I sold my Blazer and got a 1008 pickup, is because it is a 1 1/4
>ton heavy duty truck and better at towing heavier loads. The Blazer is a
>3/4 ton truck on half ton axles.
>
> "Stu"
>Southern NH, USA
>"Live Free Or Die"
>
>MVPA #14790
>
>1967 M151A1 Jeep 1964 M416 Trailer
>1985 M1008 CUCV Pickup
>
>
>-----Original Message-----
>From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org] On Behalf
>Of Todd Goranson
>Sent: Tuesday, July 26, 2005 4:35 PM
>To: Military Vehicles Mailing List
>Subject: [MV] CUCV M105A1 trailer wiring M1009
>
>I would like to tap into the wiring on my M105A1 trailer and splice with
>a four pin wiring harness to tow behind my dodge truck. But what is
>important, is to retain the original male pin connector to continue
>towing behind my M1009 (when it gets running), can anybody please
>provide insight, a diagram or a converter to convert a trailer military
>male end to a civilian wiring schema?
>
>Thanks in advance,
>
>
>M1009
>M105A1
>New to the MVPA hobby and loving it!
>
>Todd Goranson
>Sales Engineer
>
>NetCracker Technology
>95 Sawyer Road
>Waltham, MA 02453
>Tel: 617-877-0426
>Fax: 781-419-3301
>Main: 781-419-3300
>Email: todd.goranson@netcracker.com
>



This archive was generated by hypermail 2.1.4 : Fri Oct 28 2005 - 23:22:19 PDT