From: Robert Anderson (rcakitty@hotmail.com)
Date: Sat Jan 28 2006 - 20:54:41 PST
With the rear driveshaft removed, unscrew the four bolts that attach the
>From: Chris Brunner <cjbrunner@optonline.net>
_________________________________________________________________
tailhousing to the rear T-case half. Hit the housing from side to side with
a rubber mallet or equivalent to shear the RTV adhesive/sealant and remove
the housing - - you are THERE. Replace or repair as is necessary. Robert
Anderson 1/28
>To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
>Subject: [MV] CUCV Spedometer Sensor
>Date: Sat, 28 Jan 2006 11:21:34 -0500
>
>My spedo died in the truck last week during some other related driveline
>problems (driveshaft issues). Checking the system the cable is fine, the
>spedo gear that inserts into the transfer case is fine, but the plastic
>gear inside the transfer case that the pickup rides on is shot (or gone
>would be a better word). Has anyone ever replaced the plastic gear that is
>inside the transfer case, if so is it difficult to do?
>
>Chris
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
>To reach a human, contact <ackyle@gmail.com>
>Visit the searchable archives at http://www.mil-veh.org/archives/
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:39:54 PDT