Rim #1
5 lug holes, not tapered and no recess. The layers of paint made it look
recessed.
Lug nuts are the same as M151/M416 with large built-in flat washer.
5 rectangle 'slots' around exterior perimeter each measuring 1-1/2" by 2-3/4"
Stamped inside on the rim perimeter is: K-H-E-45205-28 (where 2's could be
Z's)
Stamped inside on the rim perimeter is: Z401-43 with 43 upside down
Stamped inside on the rim perimeter is: ALCOA C R where C&R are in circles
Stamped outside between perimeter and flange is: HO70
Original paint (anodized???) appears dark OD24087
Rim #2
Lug holes, same as above.
Lug nuts, same as above.
Slots, same as above.
Stamped inside on the rim perimeter is: 8342314-28 (where 2's could be Z's)
Stamped inside on the rim perimeter is: Z766-52 with 52 upside down
Stamped inside on the rim perimeter is: ALCOA C R where C&R are in circles
Stamped inside between perimeter and flange is: EAD vertically and QAN
horizontally sharing the A
Original paint (anodized???) appears dark OD24087
Hope this helps.....
Thanks in advance,
Scott
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.