Re: [MV] The Cheap Mechanic- Differential Overhaul Update

Gordon.W.I. McMillan (
Mon, 22 Dec 1997 10:04:52 -0000

Good advice, especially about the safety equipment as the bearing steel
is hardened and brittle. My additional tip is to cut across the inner
bearing at a very slight angle (15 - 20 o) rather than straight across,
seems to work better but I dont know why. Gordon 8-)

To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <>.