Re: [MV] CCKW fuel tanks and HBTs

M151A1@aol.com
Sat, 7 Feb 1998 18:27:40 EST

I had a hole in my tank. I drained the tank. Then I sanded the area down.
Next I smeared metal-type epoxy around the hole. Then I took fiberglass and
spread over the epoxy and then put more epoxy on the fiberglass. It has held
for more than six months and is harder than a rock. Works great.

Jason

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.