Re:[MV] Need three lever light switch for M38A1 T.O. Prefered

MVTrucker@aol.com
Wed, 7 Apr 1999 08:15:44 EDT

You can take the switch apart and clean the corroded contacts. When
taken apart the contacts like to fall out and scatter, so lay a mat down to
catch them. When you go to assemble it you will have to place one
section of the switch in a vise, cover the contact side with sheet or shim
stock to hold the contacts in. Set this section on the other and slide the
sheet out. It's been years since I did this, but I do remember that it worked
just fine after I did it.
Joe MV Trucker@aol.com
http://members.aol.com/MVTrucker/home.index.html

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.