Re: [MV] T18 transfer case question

Sean Bathrick (Bathrick@imcchemicals.com)
Wed, 28 Apr 1999 12:47:31 -0500

I have forced my M38A1 xfer case (I understand it is a bit different but =
very similar) into 2 wheel low, by accident the first time. If you look =
at the pins the levers move in and out of the xfer case, there are large =
spring loaded bb's that fit into notches on them. If you move them a =
certain way at the same time it will engage but it doesn't really want to =
and I have heard stories as to why not to do it. I was told that it =
places too much torque on the single driveshaft/rear end/axles. =20
Sean
53 M38A1
51 M135
67 M416
MVPA 14222

>>> <fv74@altavista.net> 04/28/99 10:00AM >>>
Hi List
=20
I am not able to select 2 wheel drive and low range in my T18 transfer =
case in my 45MB. All other combinations work fine. Is there a problem with =
my transfer case or is this normal? My NP205 transfer case in my Dodge =
W300 does allow 2wd low. I have found 2wd low to be useful in slow moving =
parades.
=20
Dave Fillman
1945MB
=20

----------------------------------------------------------------
Get your free email from AltaVista at http://altavista.iname.com=20

=3D=3D=3D
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.