*This message was transferred with a trial version of CommuniGate(tm) Pro*
I have the mounts for the m151a1 windshield (vacuum wipers). I don't have
an a1, and somebody on the list was wanting these things a couple of months
ago, and I lost all my email around Christmas. If you (whoever you are)
still want them, email me.
Thanks
Jason
Boise, ID
----- Original Message -----
From: "Mike and Cheryl" <mleaton@netins.net>
To: <mil-veh@uller.skylee.com>
Sent: Wednesday, March 08, 2000 10:01 PM
Subject: [MV] M37 windshield frame
> *This message was transferred with a trial version of CommuniGate(tm) Pro*
> I removed the windshield from my 1952 M37 (3/4 ton Dodge
> cargo truck) to disassemble and restore. The frame has some
> how gotten water in it and frozen (swelled up bottom of frame).
> I think I can repair that, but to remove windows I had to remove
> probably 12 small bolts in the top of the frame. These were holding
> the hinge for the window. Half of these broke.
> There are threads that are tapped into a piece of strap located inside
> the frame, held tight with pop rivets, that these bolt screw into. One
> of these straps is loose and held by one of the two rivits. This seems
> a little hard to describe, I hope you can follow it.
>
> Is there a way to remove and replace these straps. Only way I can see
> is to cut a hole in the end of frame and weld it back in when done. I have
> a pop riveter that puts in threaded rivets, I think this is what I will
end
> up doing.
> Any suggestions.
> Thanks
> Mike in Iowa
> mleaton@netins.net
> Iowa Mvpa Website: http://www.netins.net/showcase/iamvpa/
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@uller.skylee.com>
> To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@uller.skylee.com>
> Send administrative queries to <mil-veh-request@uller.skylee.com>
>
This archive was generated by hypermail 2b29 : Tue Apr 04 2000 - 21:57:10 PDT