It will be hard to find those colors in an aerosol. CARC coating are
usually in a two part Polyurethane. Fed-STD numbers: 37038 Black, 30051
Brown, and 34094 Green are all flat. I would go with it. They do have a one
part Polyurethane aerosol made by Pacific West Corporation. It's a great
aerosol to work with, but it wears off quickly and easily. If you prime the
surface well, and go with the Polyurethane you should have no problem
getting that paint to outlast you.
Sgt Sjoerd A. van Keulen
MALS-26 MAG-26 HAZMINCEN
NEW RIVER BOX 21011
JACKSONVILLE NC 28545-1011
-----Original Message-----
From: jonathon [mailto:jemery@execpc.com]
Sent: Thursday, July 06, 2000 10:01 PM
To: mil-veh@skylee.com
Subject: [MV] Paint Colors From Rapco
Need some paint, spray cans prefered, for the 2-1/2 ton. Note on the door
says CARC applied 1996 and it's the three color camo, green, brown, and
black all flat. Looking at Rapco's add in MV shows a #911 Flat Black and
then under new colors it shows a 34094 "383" Green (CARC Substitute) and a
30051 "383" Brown (CARC Substitute). I've left several massages for them
but they have not returned any calls. Would the three colors I've
identified above be the ones I would need? It looks that way but just
looking for another opinion.
je
===Mil-Veh is a member-supported mailing list===
To unsubscribe, send e-mail to: <mil-veh-off@skylee.com>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@skylee.com>
To reach a human, contact <help@skylee.com>
This archive was generated by hypermail 2b29 : Mon Aug 07 2000 - 22:15:55 PDT