Stuart
I would probe the wire with one of the power check
probe lite to insure I had power to the lite socket.
If no power then start back checking to find the break
or short in the wire.
If you have good power to the socket, check the light
socket for any rust or corrosion that prevents it from
grounding properly.. 9 time outa ten thats the more
common problem..
Bob B
>From: "Stuart Ellis" <stuellis@mediaone.net>
>To: <mil-veh@mil-veh.org> (Military Vehicles Mailing List)
>Subject: [MV] Blazer emergency brake switch.
>Date: Wed, 11 Oct 2000 17:15:59 -0400
>
>Hi all!
>Emergency brake light not working. I replaced switch- what a pain in the
>as........! Still not working. Brake light does not light when you turn
>on
>key on either. I can see only 1 way to install switch. I also can't
>figure
>out how it works. When you push emergency brake everything seems to move
>away from switch metal arm. Nothing seems to contact switch.
>Anyone got any ideas?
> Stuart J. Ellis
>East Coast Sales Manager
> Intraco USA
>Web Site: www.intraco.com.sg
>Phone: 603-437-1392 Fax: 603-437-6046
>
>Notice :- This message (including all attachments) contain privileged &
>confidential information and is subject to the disclaimer notice as set out
>at http://www.intraco.com.sg/disclaim_official.htm
>
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
This archive was generated by hypermail 2b29 : Wed Nov 01 2000 - 21:37:42 PST