Some time back, someone posted a question about removing the "stuff" used to
mark MVs at DRMO sales.
I suggested then to try B12, a solvent/carburetor cleaner and after trying
several different things around the shop I finally went and bought some.
On black marker it works well, on the paint marker it takes several
trips -spray and wipe off, on spray paint in this case it did nothing (wish
I knew what paint they used) to the 4 large "U"s 2 on each end of the
bumper.
The CRC however is a different matter, it seems to pickup and move the CRC.
If you use a paper towel it picks up the color of the coating, the CRC is
thick enough that it would take a long time to remove enough to make a
difference, and B12 evaporates very quickly, but it works.
The only problem I saw in a blurring effect on the surface between camo
colors, avoidable by not crossing from one color to another.
B12 is also the stuff I mentioned in an earlier post about a my "power
increase".
I don't think it added any "power" to the fuel, but I do think it helped the
fact that my injectors were 1/2 full of gum from setting for 6 years.
Rikk Rogers - RK Lion LTD.
416 S 4th St
Ponca City OK. 74601-5335
(580)762-3157 rkltd@swbell.net
http://home.swbell.net/rkltd/
-M35A2- MVPA -22345-
This archive was generated by hypermail 2b29 : Sun Dec 03 2000 - 20:30:03 PST