Second time around.....
>Hi list,
>
>Does anyone out there have two "screws" that are found in the exact center
>of the drive flanges on the front hubs of the Scout Car (and probably
>others)?
>
>These are actually a bolt with a passageway in the center of the long axis
>of the bolt and are tapped on the head for a grease fitting. The bolt
(once
>again it is properly referred to as a "screw" in the holy book) passes
>through the flange and screws into the axle itself, serving to draw the
axle
>securely into the flange. The grease fitting permits grease to then be
>directed through the outer half of the axle and directly onto the thrust
>balls of the CVC joint.
>
>I need two. They are 7/16" fine thread.
This archive was generated by hypermail 2b29 : Mon Mar 05 2001 - 07:58:35 PST