>
>Thanks to all the advices from the listers as to how to get the grease out
>of the gearbox of my MUTT. I ran the vehicle, opened the drain valve,
>removed the grease blocking drain hole but alas! No oil came out!! It
>breaks my heart to admit it....there was NO oil in the gearbox but only a
>little grease!! I do not want to discuss about this any more but can only
>thank my stars for not destroying the gearbox. So much for the local
>mechanics.
>
>I used kerosine and detergent to flush. All the grease(or whatever little
>of it was in there) came out. Now the gearbox is filled with gear oil. The
>gearshifting is much smoother and me happier.
>
>But there were two tiny steel balls -each with a diameter of 0.75 cm- in
>the grease that came out of the gearbox. They do not show any damage that
>they would have suffered if they had gone in between the gear wheel teeth.
>Where could they have come from?
>
>Again thanks to one and all for the advices.
>
>Cheers!
>
>Anith
>
>
>M151A2 1984
>
>Sudan
>NE Africa
>
My guess would be ball bearings from a syncro assembly.Only by tearing it
down can they be reinstalled but then you will discover other problems.Does
it jump out of any gears down hill or on deceleration?
Andre
This archive was generated by hypermail 2b29 : Wed Apr 04 2001 - 08:10:48 PDT