Re: [MV] M35A2 SPRAG QUESTION

From: ddoyle9570@aol.com
Date: Tue Jun 04 2002 - 19:47:00 PDT


In a message dated Tue, 4 Jun 2002 10:03:24 PM Eastern Daylight Time, ilovejeeps@hotmail.com writes:

> Thanks to everyone...my truck is running great..it pulls right out in
> traffic in 2nd gear and keeps going. I haven't made it
> above 45 mph yet..

And herein is quiet likely the sprag problem. You MUST move the shift lever through first gear when beginning forward motion with the truck. If you shift reverse to second and drive away, the reverse gear clutches are staying engaged. This will cause a lot of drivetrain windup, and it is trying to work itself out. If neglected the steering wheel will tear itself from your hands, and you'll hear a loud metallic crash (like you backed over a Volvo). You can drive away in second, but always at least move the lever through first gear when beginning forward motion.

Don't let the truck roll free in a direction opposite of what the shift lever is indicating either, causes same problem.

Hope this helps,
David



This archive was generated by hypermail 2.1.4 : Fri Aug 16 2002 - 11:22:39 PDT