From: Charlie (seacoastsurplus@worldnet.att.net)
Date: Sat Aug 18 2001 - 12:50:05 PDT
And I think he forgot to add
DON'T SANDBLAST NAKED!
At 09:42 AM 7/11/02, you wrote:
>Stick with the paint stripper! If you are daring, use the strippper with a
>pressure washer! Watch that paint fly everywhere!!!
>Sandblast only rust.
>
>You cannot afford to buy a compressor that you would need to sandblast on a
>continuous basis. You really need a gasoline driven unit which of course you
>could rent. Yes you want a pressure feed pot. Look for someone who does it
>commmercially. I found a place that will do the outside of a complete deuce
>for $500. Remember too that sandblasting is not particularily good for the
>sheetmetal.
>
>If you buy a compressor, buy a 2 stage 175 psi unit.
>It is worth the extra bucks and makes all the difference
>in the world with air tools.
>
>IMHO
>Steve AKA Dr Deuce
>
>
>
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Fri Aug 16 2002 - 11:24:23 PDT