From: Royce C Hayes (rc_hayes1@juno.com)
Date: Sun Sep 15 2002 - 05:43:00 PDT
Cast iron manifolds can be successfully repaired (cracks) with a powder
welder. I have a powder welding rig that is in need of repairs
Repairs are 100 X better than stick welding.
Royce
==========================
On Sun, 15 Sep 2002 00:03:39 -0400 "Bobby Joe Pendleton II"
<bobbyjoe@chartertn.net> writes:
> I have . The exhaust manifold on my M211 broke in two pieces last
> year
>
> Bobby Joe Pendleton II
> MVPA #17657
> ----- Original Message -----
> From: "Steve & Jeanne Keith" <cckw@attbi.com>
> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> Sent: Saturday, September 14, 2002 9:25 PM
> Subject: [MV] M211/M135 intake manifold
>
>
> > Has anyone with an M135/M211 GMC had trouble with the intake
> manifold
> > breaking
> > the area where the exhaust heats the carb?
> >
> > I have 3 civy 302 GMC engines now that use the same 4 bolt (carb
> mounting)
> > mil manifold. One is cracked,
> > one is missing a chunk of metal and a 3rd one I just bought (good
> running)
> > from the junkyard
> > has had that area welded and repaired.
> >
> > Awful strange co-inky-dinky to have all three broken or cracked!
> >
> >
> >
> > Steve AKA Dr Deuce
> >
> >
> >
> > ===Mil-Veh is a member-supported mailing list===
> > To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> > To switch to the DIGEST mode, send e-mail to
> <mil-veh-digest@mil-veh.org>
> > To reach a human, contact <ack@mil-veh.org>
> >
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to
> <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:21:21 PDT