[MV] CUCV Transmission Filter

From: Ted Hintopoulos (hint@northnet.org)
Date: Sun Oct 13 2002 - 14:40:15 PDT


Great Columbus Day all!!!

Changing the filter in a CUCV tranny. It is held in place
with a shouldered bolt and a sleeve, between the filter and
the control valve assembly. The bolt was snug.

The problem, maybe; the filter is loose. In other words, it flops
around a bit. The shoulder part of the bolt is longer than the
thickness of the filter and the sleeve combined.

Is this normal or should there be some washers, O-rings, or
different parts there so that the filter remains stationary?

Or this is the way it should be? The oil feed tube is there
and that part is fine.

Thanks again,
Ted.



This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:24:08 PDT