From: Steve & Jeanne Keith (cckw@attbi.com)
Date: Wed Nov 13 2002 - 14:23:15 PST
Thanks to your M-seies Maven, David Doyle, I have a pointer to the M35A3
manual with its dual circuit brakes!
However, as good as that manual is, it has one GLARING omission. I cannot
tell if an M35A3 has 2 wheel cylinders per wheel. If it does not, then
from what
I can see of the pumbing, it all ends at the proportining valve. I cannot
believe
that they went through all this plumbing w/o carrying it all the way
through. It shows
a dual master, dual air-packs and a proportining valve then the next
figure show
stuff hitched together in a single circuit, unless of course it is X2 by
way of
dual cylinders per wheel.
Thanks again Dave
Steve AKA Dr Deuce
PS: Is there any 3 axle truck (non mil) with juice brakes and a dual
circuit
brake system?
>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:37:51 PDT