From: Dave Cole (DavidCole@tk7.net)
Date: Sun Feb 02 2003 - 19:29:42 PST
FWIW, I have a couple cheap HVLP Siphon guns and the cup is not pressurized at all. It is vented to the atmosphere.
1/31/2003 1:25:26 PM, tom-nooneofconsequence <firstname.lastname@example.org> wrote:
>the cheap HVLP guns are not truly low pressure, but are simply pressure
>pot guns that will work on lower pressures. if you look and or go to a
>distributor you should find one for under $100. they do give you much
>less over spray and the ability to spray at any angle and in tight
>places. i use 20 lbs to the pot and 10 lbs to the material, and it works
>great even with thicker enamels.
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <email@example.com>
>To switch to the DIGEST mode, send e-mail to <firstname.lastname@example.org>
>To reach a human, contact <email@example.com>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:25:24 PDT