From: Steve & Jeanne Keith (cckw@attbi.com)
Date: Mon Apr 07 2003 - 15:20:12 PDT
You also need (in my experience) a 175psi compressor (5hp-2 stage)
I have an Ingersol Rand now
Steve
----- Original Message -----
From: "Buck & Rami Sharp" <bls@inebraska.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Monday, April 07, 2003 6:07 PM
Subject: Re: [MV] 1" or 3/4" impact Wrench?
> if you buy a 3/4 id buy a ingrosolrand they are as tough as most 1 inch
> models all 1 inch are pretty good ingrasolrand is the toughest ive seen i
> have a 1 inch CP impact haven't used it but i know it takes everything
off.
> you will need a 1/2 inch inside diameter 3/4 outside i believe, hose a
high
> volume of air and lots of pressure not sure what they call for exactly.
hold
> on tight hit the button and wow they sound mean and hammer hard. sorry
about
> the spelling hope this helps
> ----- Original Message -----
> From: "Mark Ehle" <markehle@hotmail.com>
> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> Sent: Monday, April 07, 2003 2:18 PM
> Subject: [MV] 1" or 3/4" impact Wrench?
>
>
> > Folks -
> >
> > I have discovered that my wimpy 1/2" impact wrench does not have a
prayer
> > against my M35's wheel lug nuts.
> >
> > Do I need to get a 1" impact wrench, or will a 3/4" model do?
> >
> > Thanks -
> >
> > Mark Ehle
> >
> >
> >
> >
> > _________________________________________________________________
> > Help STOP SPAM with the new MSN 8 and get 2 months FREE*
> > http://join.msn.com/?page=features/junkmail
> >
> >
> > ===Mil-Veh is a member-supported mailing list===
> > To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> > To switch to the DIGEST mode, send e-mail to
<mil-veh-digest@mil-veh.org>
> > To reach a human, contact <ack@mil-veh.org>
> >
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:30:47 PDT