Re: [MV] starting trucks when condition of fuel is unknown

From: Paul A. Thomas (bluewhale@jaxkneppers.com)
Date: Thu Dec 18 2003 - 17:51:19 PST


This is how my Deuce still ' runs '. I have a 5 gal tank of gas I stick a
fuel line I ran through the floor board into to move it around.
One day I'll have the truck safe enough ( IMSHO ) to run on the roads
amongst all they little kids at the elementary school next door, etc and
get the @^@%$&# rust filled gas tank fixed. But for just moving around a
gas tank/can works fine: just remember to stuff rags into the can opening
to keep the fumes where they belong :}

Paul

****************************************************

At 03:33 PM 12/18/2003, you wrote:
>I have a friend that is in the truck rebuilding business, he has a couple of
>fuel cans (5 gal GI) and he has soldered/welded/bronzed a fitting in side of
>can close to the bottom. One can for gasoline one for diesel. He will sit
>whichever of these cans he needs on radiator shroud and secure them, run
>line to carb. or to injector pump, open petcock he installed in dischage
>from can. Unplug electrical connection to truck tank or unhook line from
>fuel pump. Crank truck and move it on yard or into shop for repairs running
>off fuel in can. Then he can drop fuel tanks or whatever needs to be done,
>and has not pumped a load of crap from tank in truck.
>
>Everette
>
>
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
>To reach a human, contact <ack@mil-veh.org>



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:26:58 PDT