S250/G shelter fuel fitting

From: ke6myk@sbcglobal.net
Date: Mon Jan 19 2004 - 11:34:52 PST


Hi. The S250/G shelter that I just installed on my HMMWV has a fuel
fitting passing through the wall to feed the fuel-burning heater from
a jerry can mounted on a bracket outside the shelter. The inside end
of the fitting looks like a regular flare fitting, but the outside
appears to be some sort of quick-disconnect fitting. A fuel hose would
be connected between that quick-disconnect fitting and a draw tube
installed in the jerry can. I do not recognize the quick-disconnect
fitting, so I don't know whether it's something standard, or something
special.

Does anybody know where I can get the proper mating fitting to connect
to that quick-disconnect fitting?

Thanks in advance!

--
Mark J. Blair, NF6X <ke6myk@sbcglobal.net>
PGP 2.6.2 public key available from http://www.keyserver.net/
Web page: http://www.qsl.net/ke6myk/


This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:28:02 PDT