Re: [MV] Clear coating for MV's

From: Sonny Heath (sonny@defuniak.com)
Date: Sat Jan 01 2005 - 17:39:19 PST


Yes, I like shiny Army trucks. Thats what we had in Germany in the sixties,
full gloss. I have five gallons I plan to use to paint my deucenahalf one
of these days.

Sonny

----- Original Message -----
From: <Krogerma@aol.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Saturday, January 01, 2005 5:54 PM
Subject: [MV] Clear coating for MV's

> Hello, list:
>
> I am doing some painting and other refurbishing on my deuce this winter
and would like some suggestions about paint.
>
> I'm not an MV purist (no hate mail, please) but I do like to keep my m35a2
work truck as close to original as practicable.
>
> I restore a lot of equipment and one combination I've found to work well
is an epoxy color coat covered with polyurethane. The epoxy seems to do well
as a rust preventative and the clear coat provides ultraviolet protection as
well as ultimate hardness. I've used Rustoleum products in the past and they
work well.
>
> I can get a local place to mix up epoxy to match any color, including
olive drab. I would like to use something like a polyurethane clearcaot,
too, but RustOleum makes only a shiny version. Anybody know where I can get
a dull polyurethane that is as tough as RustOleum? We don't like shiny Army
trucks, do we?
>
> -Kurt Matis
> Troy, NY
>
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:39:25 PDT