From: noel shelley (noel@shelley1722.freeserve.co.uk)
Date: Sun Jan 30 2005 - 07:14:44 PST
NO CONTEST , the mechanical gauges are the ones to use ----- no voltage
problems , just remember that the illuminating bulbs must suit electrical
system 12 or 24V
When fitting the pipes , start at the dash , secure the pipes at regular
intervals to the body , then allow at least two turns 2"dia as vibration
loops [loose spare pipe here }then secure to the engine . AVOID chafe at all
costs and very sharp bends . If the oil pipe fails unnoticed it will empty
your oil pan !
You can`t shorten the temp pipe !
Good luck Noel
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:39:29 PDT