Re: [MV] 24v charger

From: Bruce C. Beattie (bruce@eecs.berkeley.edu)
Date: Tue Feb 08 2005 - 18:33:09 PST


Hi Ron,
    This is what I got for my M1028. I bolted on to the panel that holds
the Nato Plug.
Then let the power cord come down and tied in place, so I can run an
extension cord out
from the house, slip under the front and plug it in without ever raising
the hood.
There is an idiod light on the front that I can see thru the grill.
other than that it is virtually
un noticeable.
    There are two sets of cables to charge each battery seperately so
you don't need two
seperate chargers.
    Here is the stuff off their web site. It costs about $100.
Bruce MVPA 23824

Model: ChargeTek 12 V or 24 V Output with Dual 12V Isolated Outputs #
CT-500-1

The CT 500 fully automatic charger that can manage 1 or 2 batteries at
once. In the case of 2 batteries the charger manages each battery
separately. This computer SMART charger applies super efficient 3 step
regulated charging and charges batteries quickly. When a full charge is
reached, a float mode is maintained and the battery remains at full
charge until it is ready to be used. The CT-500 can be used for single
12 volt, dual 12 volt and two 12 volt batteries in series as 24 volt
system.

 



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:39:51 PDT