M101 spacers

From: Darrell Ramsell (daram@comcast.net)
Date: Tue Mar 14 2006 - 01:20:59 PST


Thinking of trailer parts, does anyone know where I can get a 1/4 inch
spacers for a M-101A2? I have HMMWV tires on my trailer and the tires will
occasionally rub on the body when carrying a very heavy load.

Thanks

Darrell

----- Original Message -----
From: "Wayne Harris" <papercu@hotmail.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Monday, March 13, 2006 9:12 PM
Subject: Re: [MV] Anyone have part number for M101 chevy trailer wheel bolt?

The numbers for those are: NSN 5306-01-237-6844 P/n 12354223. All my 3/4
trailers have 8 lug split ring rims. Are you saying the M1008 rims will
interchange? I have a shelter dolly that the rims will interchange with the
old jeeps. Wayne
----------------------------------------
> To: mil-veh@mil-veh.org
> Date: Mon, 13 Mar 2006 19:53:16 -0500
> From: milspectruck@verizon.net
> Subject: Re: [MV] Anyone have part number for M101 chevy trailer wheel
> bolt?
>
> Hi Dave
> Roger on the M116 series trailer. You may try Saturn Surplus, TNJ Murray,
> Frontline and Rapco. Chances are they would have the wheel stud you need
> for the M116 trailer. Another idea would be to take one of the old ones
> to
> an older NAPA parts and match it up. They used to always have quite an
> assortment of studs in the parts drawers.
>
> Glenn
>
> -----Original Message-----
> From: David Russo [mailto:drusso1@adelphia.net]
> Sent: Monday, March 13, 2006 6:13 PM
> To: Military Vehicles Mailing List; G Shaw
> Subject: Re: [MV] Anyone have part number for M101 chevy trailer wheel
> bolt?
>
>
> Thanks everyone for the suggestions, specifically what I am looking for
> would fit the M116 series. (which amounts to M101 with 1008 wheels) The
> K3500 lug nuts fit but the lug bolt is too wide at the shoulder. This stud
> is 9/16 the full length, the Chevy is a bit wider at the splined
> shoulder.
> Dave R.
>
>
> ----- Original Message -----
> From: "G Shaw" <milspectruck@verizon.net>
> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
> Sent: Monday, March 13, 2006 10:16 AM
> Subject: Re: [MV] Anyone have part number for M101 chevy trailer wheel
> bolt?
>
>
> Hi
> Wayne, he may also be looking for the studs for the M116 series ie.
> M116A1E1
> which many people think is an M101 with 8 lug M1008 wheels. Then of
> course
> is the M1101/M1102 series HMT which is now the LTT series now that all the
> mods have been done as a result of the giant pissing contest between the
> lobbyisets for the unsuccessful contract bidders and the winner Silver
> Eagle
> (Raytheon Corp). He also could be looking for the stud for the M101A3
> which
> is out there now in some numbers by the USMC and are seen at the DRMO's
> here
> and there. I think he needs to throw out the exact 8 lug 3/4 ton trailer
> model as all of the above are commonly used and then we can try out NSN
> databases for the exact stud needed.
>
> As an aside the lugnuts on the Humvee and the LTT will interchange. Lug
> nuts from the GMC 1 ton K3500 can be used also nut not the studs.
>
> Regards
> Glenn
>
>
>
> -----Original Message-----
> From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org] On
> Behalf
> Of Wayne Harris
> Sent: Monday, March 13, 2006 1:10 AM
> To: Military Vehicles Mailing List
> Subject: Re: [MV] Anyone have part number for M101 chevy trailer wheel
> bolt?
>
>
> The 3/4 trailer for the HMMWV is known as M1101 (Light) or M1102 (Heavy)
> the
> military NSN and the part number for the stud is 5306-01-418-9086 p/n
> 9251100 Bolt, Shoulder. The numbers for the nut is 5310-01-414-6476 p/n
> 90640 Nut, Plain, Cap. The bad news is that they seem only to be found on
> that trailer, military inventory at least. Hope this helps, Wayne
>
>
>
>
> ----------------------------------------
> > To: mil-veh@mil-veh.org
> > From: drusso1@adelphia.net
> > Subject: [MV] Anyone have part number for M101 chevy trailer wheel
> > bolt?
> > Date: Sun, 12 Mar 2006 17:17:09 -0500
> >
> >
> >
> > Does anyone have a part number (GM or otherwise) for the M101 3/4
> > trailer wheel bolt (stud)? This is the Chevy 8 lug pattern, not the
> > M37 pattern. It is not a 3/4 ton Chevy truck wheel bolt as I had
> > hoped. thanks
> > Dave Russo

_________________________________________________________________
Because e-mail on your cell phone should be easy: Try Windows Live Mail for
Mobile beta
http://www2.imagine-msn.com/minisites/mail/Default.aspx?locale=en-us
=Mil-Veh is a member-supported mailing list=
To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
To reach a human, contact <ackyle@gmail.com>
Visit the searchable archives at http://www.mil-veh.org/archives/



This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:42:26 PDT