Re: [MV] Blinkers and MG gun mounts and pedistals

JStinson90@aol.com
Tue, 16 Jun 1998 02:44:42 EDT

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Bob & Jeff Gallagher: "[MV] MG tax"
Previous message: JStinson90@aol.com: "[MV] Re: diffs"
Maybe in reply to: David Brubaker: "[MV] Blinkers and MG gun mounts and pedistals"
Next in thread: Ron Johanson: "Re: [MV] Blinkers and MG gun mounts and pedistals"

I got my M60 cradle at SARCO, Inc.
323 Union Street
Stirling, NJ 07980
Phone: (908)647-3800
Fax: (908)647-3846
Is your M60 real or dummy?
I have a dummy for now!! Can't afford the yearly taxes on a full auto just
yet, But its alwas on my wish list.
I have a friend with a real one and he pays $1,000.00 a year to the Gov't for
a full auto!!!!!
How much did you pay for your M4 pedestal and was it cut ? I was told to get
an uncut one is rare ! Mine was never cut. I know where 15 more are sitting
(UNCUT) !!!
Make sure that you drill your 4 holes for the pedestal thru the special ribs
that are under the floor between the driver and passenger seats you can only
see them from under neath. I miss judged mine by 1/4 in. Good thing I'm not
shooting a rear M60 from it. (or it might tear out of the floor)

Your "JEEP" nut !!!!!!!!
Jeff
MVPA member:
62 M151
67 M151A1 w/M4 Pedestal & Cradle,M60(dummy),AN / VRC-46(radio),heater
71 M151A2 w/ROPS,heater
67 M416

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

Next message: Bob & Jeff Gallagher: "[MV] MG tax"
Previous message: JStinson90@aol.com: "[MV] Re: diffs"
Maybe in reply to: David Brubaker: "[MV] Blinkers and MG gun mounts and pedistals"
Next in thread: Ron Johanson: "Re: [MV] Blinkers and MG gun mounts and pedistals"