[MV] Re: M151A2 LUBE Reply
JStinson90@aol.com
Fri, 31 Jul 1998 03:20:09 EDT
Some time ago Russell wrote about needing to know this info:::::::::::::
Now that I have my long desired mutt, what civilian lube should I use in
the following:
a. tranny? (GO 80 / 90)
b. transfer case (if different from the tranny)? (SAME)
c. differential? (GO 85 / 140)
d. master cylinder? (this depends on whats already in it. eather DOT3 or DOT
5)
there is also mention of greasing two areas in the distributor (I don't
have the manual with me so I can't be more precise at this moment). What
grease should I use? (I have never heard of this!)
What about grease for the grease joints? ( I use a marine grease)
Thanks again for all of your help on the transfer case bearing question.
Russell
Jeep Nut in Training
M151A2 (Viet Nam era Jeep) with M4 mount and M60 all pulling a M416 trailer
(that small two wheeled trailer that holds up to about 3/4 ton).
Hope this info helps.
Your "JEEP" nut !!!!!!!
Jeff
MVPA Member # 18907
62 M151
67 M151A1w/M4 pedistal&Cradle,M60(dummy)AN/VRC-47(radio)heater,fording kit
71 M151A2 made of GALVANIZED STEEL(replacement body) w/ROPS,&heater
67 M416 trailer
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.