[MV] M38A1 Starting problem

Bob Klein (bob@campingworld.com)
Mon, 08 Feb 1999 13:57:17 -0600

Sorry group,

I left out some important info. It is still the old 24V system. Before I
put the military wires on, they had civilian plug wires stuffed into the
top of the 24V distributor until it touched the cap. Im not sure of the
coil brand however it is a 24V coil. The points are opening up. I have
seen them open. There may be a small problem with the gap though. I do
not have them properly gapped. I have estimated the opening. I will
check the gap. I also in my stupidity when it did have it running, I had
the distributor wire and the points/condenser wire on the wrong posts of
the coil. I switch them back after it died. Could this have shorted the
condenser? The coil? How come it ran with the wires crossed in the
distributor? You will have to forgive my electrical ignorance. Thanks

bob klein
bob@campingworld.com

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.