Re: [MV] Dodge T223?

Claude W. Vaughn (vaughn@totalaccess.net)
Sat, 16 Oct 1999 08:14:07 -0500

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Anthony Stephenson: "[MV] new guy"
Previous message: Pfdad@aol.com: "RE: [MV] Dry cleaning solvent"
Maybe in reply to: MVTrucker@aol.com: "[MV] Dodge T223?"
Next in thread: MVTrucker@aol.com: "Re: [MV] Dodge T223?"

The Dodge T-223 Model engine was originally for the Dodge 1-1/2 Ton 6x6 (WC-62 &
WC-63) and would have been built with an oil bath air cleaner. Interesting that
this engine has found its way into an M37. And you are correct in that the M37
would have been built with the T-245 engine.

MVTrucker@aol.com wrote:

> List,
> Today while working on an M37, I happened to notice some sort of metal
> tag fastened to the right side of the engine just below the manifolds. ... The
> left side of the block, up towards the front of the block is a serial number.
> It starts out T-223. I thought M37 motors were of a different number, like
> T-245?

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

Next message: Anthony Stephenson: "[MV] new guy"
Previous message: Pfdad@aol.com: "RE: [MV] Dry cleaning solvent"
Maybe in reply to: MVTrucker@aol.com: "[MV] Dodge T223?"
Next in thread: MVTrucker@aol.com: "Re: [MV] Dodge T223?"