----- Original Message -----
From: Keith, Steve <Steve.Keith@compaq.com>
To: <fv74@altavista.net>; Mark McKee <omnitech@sound.net>
Cc: <mil-veh@skylee.com>
Sent: Thursday, October 21, 1999 5:58 AM
Subject: RE: [MV] M38A1 front end shimmy?
>
> > king pin bearings are also suspect
>
> I have fount this to be the case many times with bigger
trucks. It is
> usually the upper trunnion bearing. It gets wet and rusts a
little.
> Remember, these bearings are riding on the same few rollers on
the same side
> all the time. Another thing that will help is a new knuckle
seal. The wiping
> action will act as a steering damper until it wears in.
>
>
> Steve
>
> ===
> To unsubscribe from the mil-veh mailing list, send the single
word
> UNSUBSCRIBE in the body of a message to
<mil-veh-request@skylee.com>.
>
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.