Jeff & Jerome
Thanks guys, This was the answer I was looking for, I did not thing the plug
on the side could be the fill, but it does have a vented line on the top,
the hard line is what caused my confusion.
And yes, is uses DOT5, that was hard to find and pricey too, $8 for a pint.
Thanks again,
rikk
-----Original Message-----
From: TacticalTruck@aol.com [mailto:TacticalTruck@aol.com]
Sent: Saturday, December 30, 2000 7:41 PM
To: rkltd@swbell.net
Subject: Re: [MV] M35A2 Brake master cylinder
rikk
The cap on your truck may be self vented or vented through a small hard
line.
Unhook the small line if it's there. Use a 3/4" open end to unscrew the cap.
Fill the reservoir to the top. CAUTION Your truck probably uses silicone
brake fluid. Usually there's a sticker on the dash or trap door that says
use
silicone fluid only. Determine which type of fluid your truck uses and fill
with same. Do not mix different types of fluid.
Let me know what you find.
Jeff
This archive was generated by hypermail 2b29 : Tue Jan 02 2001 - 23:13:26 PST