Re: [MV] M1009 CUCV radio mounting kit?? Factory mounting plates for VRC-47??

From: Jim Newton (jnewton@laurel.com)
Date: Sun Jul 22 2001 - 22:02:43 PDT


Hi Jumpmaster...

>Does anyone know the NSN for the correct mounting kit
>to install the AN/VRC-47 set into the M1009 CUCV? The
>parts I need are just the CUCV factory mounting plates
>(for a reasonable price if anyone has spares,
>please...). From the pictures I've seen, they're
>black and fairly rudimentary. I already have the
>VRC-64 and R-442 with MT-1029 and MT-1898
>respectively...I also have a large, CARC green
>mounting plate for the MT-1029 and MT-1898. These are
>not the factory CUCV mounting plates -- I think the
>plates I have bolt onto the factory mounting plates
>and the MT- mounts bolt onto those plates...if any of
>that makes sense. An installation bulletin would be
>helpful also.

Here are two TBs I have that cover installing radios into the
M1008A1...you may find the info you need for your M1009 here:

***

INSTALLATION INSTRUCTIONS FOR INSTALLATION KIT, ELECTRONIC EQUIPMENT,
MK-2314/VRC (NSN 5895-01-216-9748) (EIC: N/A) TO PERMIT INSTALLATION
OF RADIO SET AN/VRC-89/91/92 SERIES IN A TRUCK, CARGO, TACTICAL, 1 1/4
TON, 4x4, M1008A1

  http://www.cucv.net/afm/cucv/TB_11-5820-890-20-24.pdf

***

INSTALLATION INSTRUCTIONS FOR INSTALLATION KIT, ELECTRONIC EQUIPMENT,
MK-2313/VRC (NSN 5895-01-216-9743) (EIC: N/A) TO PERMIT INSTALLATION
OF RADIO SET AN/VRC-87/88/90 SERIES IN A TRUCK, CARGO, TACTICAL, 1 1/4
TON, 4x4, M1008A1

  http://www.cucv.net/afm/cucv/TB_11-5820-890-20-25.pdf

***

Hope these help!

-- 

Jim "Ike" Newton

o 1984 Military CUCV Suburban 6.2 Liter Turbo-Diesel Engine 3/4 Ton Cargo Capacity, 4WD

o 1971 M35A2 Military Troop/Cargo Truck "Deuce and a Half" 478 Cubic Inch Turbo-Diesel Multi-Fuel Engine Air Shift Front Axle 2 1/2 Ton Cargo Capacity, 6WD

See them at: http://www.CUCV.net



This archive was generated by hypermail 2b29 : Tue Aug 07 2001 - 09:34:13 PDT