From: Gene Pantano (truks@cs.quik.com)
Date: Thu Feb 14 2002 - 12:20:09 PST
There are 2 common "suspects" for this "no start" problem... One is..on the
solenoid of the starter...the plate is burned and has a carbon coat on it..
Very simple fix...It can be reversed to the new side.
Or..on the back of the starter button..the wired do not make a great
contact.. Remove the 2 wires at back..clean them..press them back in and be
sure they are nice and tight.. You might have to squeeze the female
connector to make it tight.?? Hmmm..
Anyway..these are the 2 main problems encountered at the motor pool... The
solenoid on the side of the block may have a loose connection as well.. Gene
Subject: Re: [MV] M35A2 starting problem
This archive was generated by hypermail 2.1.4 : Mon Apr 08 2002 - 00:23:57 PDT