From: David Cole (DavidCole@tk7.net)
Date: Thu Oct 02 2003 - 09:57:12 PDT
Most welding supply shops will also make up cables for you. They have the
crimping tools to put the ends on properly. The battery cables in my M51
dump truck look like welding cable.
Dave
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
On Tue, 30 Sep 2003 18:52:36 +0000, D O <dohe69@hotmail.com> wrote:
> I am not sure what size it is, but I put a ground disconnect switch on
> mine to kill power to the entire truck (except the solargizers which are
> hardwired to the batts). I used 00 welding cable and crimped/soldered
> the eyelets on them. Try weldingdepot.com or weldingsupply.com for
> cable, but you would have to put on your own eyelets.
>
>
>> From: AVarvarigo@aol.com
>> To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
>> Subject: [MV] M35A2 positive batt. cable
>> Date: Tue, 30 Sep 2003 12:16:39 -0400
>>
>> Hi guys, anyone knows the gauge thickness of the positive battery cable,
>> coming out of the battery terminal itself, and going to the starter etc?
>> I want to get a short jumper of the same thickness in order to put a cut
>> off switch in line with it.
>> In fact I would appreciate any recommendations to places I can get the
>> short cable from.
>> The cable has to have eyelets on both ends and the shorter the better.
>> Thank you, Tony V. (avarvarigo@aol.com)
>>
>> ===Mil-Veh is a member-supported mailing list===
>> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
>> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-
>> veh.org>
>> To reach a human, contact <ack@mil-veh.org>
>
> _________________________________________________________________
> Share your photos without swamping your Inbox. Get Hotmail Extra Storage
> today! http://join.msn.com/?PAGE=features/es
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
-- Dave
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:24:59 PDT