Re: [MV] 10KW MEP-018A ?

From: noel shelley (noel@shelley1722.freeserve.co.uk)
Date: Wed Sep 29 2004 - 00:41:39 PDT


Hi ,
        Check the revs , they MUST be correct , a small change in revs will
have a BIG effect on voltage and is proportional to frequency . Whilst a
frequency meter is about $70 it will set revs VERY accurately an engineers
rev counter is fine but an automotive rev counter is better than nothing .

                     Good luck Noel



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:35:16 PDT