From: V SCHWARTZ (vsaws@optonline.net)
Date: Sun Mar 12 2006 - 09:52:14 PST
Nick, You can weld them up witha mig welder . just put a small piece of
> Hello esteemed list. I have a number of pinholes in the A2 body that I do
copper behind the hole that grind off the bead. Even eadier is to braze them
cloled with bronz rod wntill the metal flows like lead . then ssand smooth
and finish with a slight amount of body filler , prime and paint.
----- Original Message -----
From: "Michael S. Nichols" <m.s.nichols@comcast.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Sunday, March 12, 2006 12:44 PM
Subject: [MV] Pinholes in M151A2 body
> not wish to completely cut up and replace with new steel patches. If I
> grind the area to bear metal inside and out, shall I use Bondo or learn
> how to use lead to fill them in a workmanlike manner? Thank you.
>
> Regards,
>
> Mike Nichols
> Member GA. MVPA
> M151A2 '72
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
> To reach a human, contact <ackyle@gmail.com>
> Visit the searchable archives at http://www.mil-veh.org/archives/
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:42:05 PDT