From: claude.vannuffelen (claude.vannuffelen@wanadoo.fr)
Date: Mon Mar 13 2006 - 02:01:29 PST
Michael,
You can use also fiber glass mat with polyester in the corroded area.
You first have to grind to remove rust and do that when weather is hot to
have good polymerisation of the polyester.
I think you can find such kits in all car shops.
Claude (M1009 in france)
----- Original Message -----
From: "Michael S. Nichols" <m.s.nichols@comcast.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Sunday, March 12, 2006 6:44 PM
Subject: [MV] Pinholes in M151A2 body
> Hello esteemed list. I have a number of pinholes in the A2 body that I do
> not wish to completely cut up and replace with new steel patches. If I
> grind the area to bear metal inside and out, shall I use Bondo or learn
> how to use lead to fill them in a workmanlike manner? Thank you.
>
> Regards,
>
> Mike Nichols
> Member GA. MVPA
> M151A2 '72
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to <mil-veh-off@mil-veh.org>
> To reach a human, contact <ackyle@gmail.com>
> Visit the searchable archives at http://www.mil-veh.org/archives/
>
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:42:05 PDT